Mounted plough PLN-4-40 for systematic plowing
Plough PLN-4-40 is intended for tillage of soils for grain and technical crops, without stones with specific resistance to 0.1 МPа (1.0 kgf/cm²) at the depth to 27 cm. Plough operates on all types of soils with moisture of cultivated layer to 23%. Height of stubble and herbage is to 25 cm.
Plough is mounted on BELARUS 1221 tractor, with 1800 mm tractor track width.
Plough is equipped with semidigger type bodies with extended mouldboardss and brackets with cut fingers for prevention of bodies’ breakage at runover on accidental obstacles.
Plough point is strengthened by specific chisel for increasing a wearing capacity of ploughshare and moldboard breast. All wearing parts of bodies are made of high-quality steel and heat treated.
Plough is supplied completely assembled without spare parts kit. The works is ready to supply changeable operating elements and spare parts for plough on customer demand.
| Number of bodies |
4 |
| Type of body |
semidigger |
| Operating width of base, cm |
40 |
| Protection of base |
shear bolt |
| Operating width of plough, m |
1,6 |
| Operating travel speed, km/h |
7 - 9 |
| Tilling depth, cm |
27 |
| Possible capacity , ha/h |
1,035 |
| Overall dimensions of plough, mm: |
| length |
4320 |
| width |
1950 |
| height |
1500 |
| Weight, kg |
800 |
| Types of cultivated soils |
Intended for tillage of soils without stones for grain and industrial crops, with specific resistance to 0.1 MPa. |
| Drawbar category of tractor on which it may be mounted |
2 |
| Manufacturer |
Minsk Gear Factory |
|