Semi-mounted reversible plough PPО.9.30/45
Plough PPО.9.30/45 is intended for tillage of previously cultivated stony soils with specific resistance to 0.09 МPа (0.9 kgf/cm²), foul with stones to 100 mm in diameter and other obstacles. Ploughs can operate on all types of mineral soils with moisture of cultivated layer to 30%, with height of stubble and herbage to 25 cm.
Plough is mounted on tractors: BELARUS 3022DV, BELARUS 3022.
Frame consists of some beams connected by means of brackets in unified bearing structure. Structure of basic beam – pipe with outside square section 200x200, special heat-treated for providing a high structural strength and service life.
Easy spring protection system allows the bodies to pass smoothly stones and other obstacles and automatically return in initial state that provides stability of bodies operation at soil tillage of various texture, consistency and moisture. Bodies spring safety devices exclude a use of oil and nitrogen, applied in hydropneumatic system of bodies’ protection.
Irregular semidigger shape of body provides the required layer pulverization and good trash burial to 25 cm height. Plough point is strengthened by reversible chisel. All wearing parts of bodies are made of high-quality steel and heat treated.
Traverser provides stability of plough at transportation and at operation.
Adjustment of bodies’ coverage is made by means of bodies rearrangement on holes.
|Number of bodies
|Type of body
|Operating width of base, cm
|Protection of base
|Operating width of plough, m
|Operating travel speed, km/h
||8 - 12
|Tilling depth, cm
|Possible capacity , ha/h
||2,4 - 4,3
|Overall dimensions of plough, mm:
|Distinctive feature of plough
||Adjustment of body coverage and field contour following at tillage.
|Types of cultivated soils
||Intended for tillage of all types of soils (weakly- and medium stony) with specific resistance to 0.1 MPa
|Drawbar category of tractor on which it may be mounted
||Smorgon Assemblies Plant